Hardware & Credentials

uniVerse^® CICP2100 Series POE Single-Door Controllers
Fast, easy cost-saving access control solution for adding 2 access control readers at any door

Now featuring EZ-learn mode for use in the CA4K software environment, the cost-saving CICP2100 & new surface mount CICP2100S Power Over Ethernet Controllers support two readers and/or one low current strike via POE. IT-friendly, supports POE or RS485, to downstream 10 controllers on 1 network drop. Dramatically reducing labor and equipment costs, the CICP2100 Series can be used networked with, or in place of conventional 2-16 Door Supertwo^® or Accelaterm^® Controllers and/or Networx^® Wireless Access Control Locks. Up to 14 uniVerse Controllers can be networked together using RS485 high-speed repeat mode. There are two models, one that fits in a double-gang box and new surface-mount model, ideal for cinder block construction or any hard-to-wire applications.

Saves $1000/door dramatically reducing labor and equipment – Surface mount or fits in double gang box & powers ID readers & electric strike
New & improved! EZ learn networking
POE or optional 12V transformer
IT-friendly POE or RS485, to downstream 10 controllers on 1 network drop
POE Panel Supports 2 Readers for 1 Door
Superfast 54 MHz RISC Processor
Supports 200K cards
4MB on-board memory
1000 Standard transaction buffer, Expandable to 10,000
256 Time schedules; 30,000 Access groups; 5x100 Holidays
2 Form C Relay outputs, door and auxiliary (MOV- protected)
Supports power for low-current electric strike
Reader & Accessory Power- 350mA @5VDC & 700mA @12VDC
POE Onboard Ethernet
High Speed 921.6 KBPS baud communication support
Supports RS-485 Repeat Communication (4-wire) & Readers (2-wire)
4 Supervised inputs
Unsurpassed FIPS/CAC/TWIC performance
36-month Continental Warranty

CICP2100: Double-Gang Box POE Controller

Download Spec Sheet, A695

CICP2100S: as above, but Surface Mount Controller, in Locking Metal Enclosure

Download Spec Sheet, A760

Accelaterm CICP2800 Super-Speed

16-Door Access Controller
Featuring:
8 to 16 reader panel, minimum 40,000 card capacity, 100,000 - 200,000 typical, expandable to Million+
10-Times Faster! Under 5-Minutes for full downloads (firmware & data). Onboard direct-connect LAN adapter for speeds over 921Kbps
Superfast 54MHz 32-bit processor
4MB on-board memory, expandable to 20MB
24 Supervised inputs; expandable to 72
17 Form C-rated relay outputs, expandable to 65
1000 Transaction buffer, expandable to 50,000(software dependent).
256 Time Schedules; 30,000 Access groups; 5x100 Holidays
Unsurpassed FIPS/CAC/TWIC performance
Retrofit-Ready -Simultaneous multi-reader/ID credential support
Super-capacity power supply for max. standby & reader power, included
Virtually Environment- & Power Outage-Proof – Full onboard multi- stage lightning protection and fully distributed processing to internal memory (works as standalone system if server is down).
Lowest acquisition & maintenance costs – 3-year warranty

Use with new CA3000 v2.11 Software!

Download Spec Sheet PDF

Single Door Controller/Lock

Up to 5000 badges
1-2 Wiegand output devices (readers and or keypads) controlling one door
Downloadable Firmware loaded to Flash memory
99 Time Schedules
99 Access Groups
5 sets of 30 Holidays
Supports up to 63 Networx Panels per Gateway
Inputs for door position contact to indicate the status of the door
Inputs for a remote release button or sensor
Proximity Card Formats Supported: Most formats supported
Onboard bi-directional Networx radio
Operating Temperature: 14-120°F (–10-49°C)
Input Power: 16.5VAC via Class 2 Plug-In 50VA- Transformer (supplied model TRF-14)
Maximum Lock Power Output Current: 1.5A @12VDC
Primary and Secondary Relays: SPDT Form C, N/O, N/C 8A @ 30VAC or VDC
Supplied Backup Battery: Sealed Lead Acid 4AH
Battery Backup Time: Approximately 2 hours at full load
Housing Dimensions (H x W x D): 10.5 x 8.5 x 3 in. (26.6 x 21.6 x 7.6 cm)

Download Spec Sheet PDF

Trilogy Networx

Download Spec Sheet PDF

Continental Controllers

Continental's Turbo Superterm and SuperTwo control panels are expandable, intelligent and capable of supporting all access control functions. These distributed processor-based panels will operate as standalone units if server-communications are interrupted. Panels are programmed with CardAccess software, a Windows based access control and security management solution. Legacy panels are field expandable, allowing for longer life and for adding features and enhancements. Continental's controllers feature extensive multi-stage lightning/transient protection on-board for maximum reliability even in harsh environments. Our Continental panels accept industry standard Wiegand output devices and supports virtually all card/reader technologies. Proximity, Biometric, Magnetic Stripe, Barcode, Wiegand, Barium Ferrite, Keypad and Smart Readers are easily connected and controlled.

SuperTwo

2 doors
Supports 20,000 – 125,000 cards
5 to 48 outputs; 8 to 48 inputs
High speed communications
Optional Onboard Network Adapter

Click Here for Super Two

Super Two I/O Expander

Up to 3 additional Super Two I/O Expansion Boards are housed in matching enclosure
Each Super Two Expansion board supports up to 16 inputs and 16 relays, for a system max. of 48 inputs & 48 outputs

Click Here for I/O Expander